SSD to SATA Adapter For MacBook Air Pro A1398 A1425 A1465 A1466 (Mid 2012,Late 2012)
SSD to SATA Adapter For MacBook Air Pro A1398 A1425 A1465 A1466 (Mid 2012,Late 2012)
SSD to SATA Adapter For MacBook Air Pro A1398 A1425 A1465 A1466 (Mid 2012,Late 2012)
The adapter card is used the following model SSD solid-state drives:
- 2012 version of the apple PRO RETINA A1425 A1398 / MC975 MC976 MD212 MD213 ME662 ME664 ME665
- 2012 version of the apple AIR A1465 A1466 MD223 MD224 MD231 MD213 MD232
Note :
- SSD put way, SSD interfaces to narrow side up, wide edge at the bottom, that is to say, SSD label inserting interface on the face, connecting plate is inserted into the direction of identity, in the picture above is APPLE RETINA with solid-state drives, in the picture below is APPLE APPLE AIR with hard drive, two hard disks have different length, as long as the locking screws at the end of the move.
- SSD installed, can be directly fixed on the desktop drives a position, because the width of the adapter plate with the thickness of the 3.5 -inch drive is the same, so can be a perfect match
- If you have 2.5 to 3.5 hard disk stents, very convenient also fixed, as long as the transfer of two fixed screw from middle to the edge.
- 2012 new apple laptop A1465 / A1466 / A1435 / A1436 dedicated SSD SSD adapter card, into a 3.5 -inch SATA interface, used in desktop computers, SATA3 interface, switching version using high-capacity solid-state capacitors, high power "chip, let your SSD work steady and fast!
- This adapter card only applies to 2012, the new apple laptop with solid-state drives, paragraphs 2011/2010 with 2012 SSD rough look more similar, actually interface is not the same.
LCD Screen Grades
Condition | Description | LCD | Glass | Flex Cable | Frame | Appearance Intactness |
---|---|---|---|---|---|---|
Aftermarket Basic | China LCD | JK | Aftermarket | Aftermarket | Aftermarket | New |
Aftermarket Standard | Flex Cable Replaced | Original | Aftermarket | Original | Aftermarket | New |
Aftermarket Selected | Glass Replaced | Original | Aftermarket | Original | Aftermarket | New |
Original Pulls | Pull From Used Devices | Original | Original | Original | Original | New Alike |
Original | Original Equipment Manufacturer | Original | Original | Original | Original | New |
In Union Repair store, we grade our iPhone screen into 5 different types of quality based on different material assemblies. The table above shows the full details of each condition.
After Market Basic
After Market Basic
It is with widely accept major complaint replacements for original parts, which keeps a right balance between price and quality. It has sustainable supplying chain in China, and all the components of the screen are copy quality. Typically, the LCD screen is from several different factories, the most popular 4 on China market are JK,AUO, LongTeng, and ShenChao. By comparing the brightness and sharpness of the LCD, we found JK is the best quality among them and the second best is AUO. No doubt, the other components on the screen are all copy.
After Market Standard
After Market Standard
It is better than After Market Basic cause it comes with original laminated flexes and the LCD panel. Other components like touch panel, frame(hot pressed), backlight, polarize lens, and OCA is all copy from different factories.
After Market Selected
After Market Selected
The core components (like LCD and flexes) is 100% original pulled from used iPhone while the frame and touch panel is copy. The touch panel and frame come together with cold pressed glue and assembled together with the LCD by the capable third-party factory which keeps its excellent quality.
Original Pulls
Original Pulls
No doubt, it is tear down from used iPhone with all the parts 100% original and working perfectly just like an original new screen, it has whatever the original new screen has. The only complaint about this quality is that some of the displays are with 1 or 2 scratches but still be welcome by our critical customers who are requiring good quality.
Original New
Original New
It is 100% original from Apple-authorized factories like Toshiba, Sharp, and LG. We get this kind of screen from the first level dealer. The touch panel of the screen is oleophobic coated which prevents from fingerprints when using your iPhone. And starting with iPhone 7g, the backlight from different authorized factories comes with a different code. Backlight from Sharp has the code begins with DKH/CON, from Toshiba begins with C11/F7C/FZQ, from LG begins with DTP/C3F.